Products

TICA VRF TIMS E+

TICA TIMS E+ commercial VRF outdoor unit against a cool-toned city and mountain backdrop

TIMS E+ Freedom Series

TICA INVERTER MULTI SYSTEM

All-Scenario Commercial VRF

Intelligent Comfort for Every Commercial Space

TIMS E+ Freedom Series is TICA’s commercial full-inverter VRF solution for offices, hotels, apartments, commercial complexes, educational facilities, medical auxiliary spaces and large buildings. It brings wide-temperature cooling and heating, modular capacity, long-piping flexibility, healthy air treatment, centralized and remote control, tenant billing and BAS connectivity into one platform. Covering 8–102 HP with 18 indoor-unit types, TIMS E+ helps designers and operators adapt each system to different building scales, room functions and long-term management needs.

Wide-Temperature Operation

Reliable Comfort Across Extreme Climates

TIMS E+ provides stable cooling from −16°C to 56°C and dependable heating from −30°C to 27°C, helping commercial buildings maintain consistent indoor comfort through severe winters, hot summers and changing outdoor conditions.

TICA TIMS E+ outdoor unit illustrating cooling and heating operation across a wide ambient temperature range

Four-Dimensional Intelligent Control

Stable Cooling Even at −16°C

Powered by the TOS 9.0 O-L coupling algorithm, TIMS E+ continuously recognizes ambient conditions, calculates system load, senses operating trends and adjusts control parameters to maintain stable and reliable cooling in low-temperature environments.

Diagram showing ambient temperature and load identification within TIMS E+ intelligent control
1

Ambient Temperature Identification

Indoor and outdoor units automatically adjust operating zones according to changes in ambient temperature.

2

Load Zone Identification

The system compares target conditions with actual operating status to determine the initial load requirement.

Diagram showing operating trend perception and coordinated control within TIMS E+
3

Perception Zone Identification

The system tracks temperature trends, rates of change and operating status to refine control parameters in real time.

4

Control Identification

Operating output is coordinated according to calculated load requirements for stable performance under different application conditions.

High-Efficiency Compressor Technology

Wider Modulation for More Efficient Operation

The advanced compressor combines a wide 10–130 rps operating range with 6-pole motor technology, enabling precise capacity adjustment as building loads change while improving operating stability and energy efficiency by up to 10%.

TICA TIMS E+ high-efficiency inverter compressor with wide-speed operation
10–130 rpsWide Operating Range
6-PoleMotor Technology
Up to 10%Energy Efficiency Improvement

Reliable Oil Management

12-Stage Oil Return for Stable Long-Term Operation

A coordinated 12-stage oil management system combines pressure-difference oil supply, internal oil separation, multi-stage oil storage and precise return control. It helps maintain reliable compressor lubrication under changing loads and complex piping conditions.

Oil Return Rate up to 99.99%

Oil Supply via Compressor Pressure Difference

Internal Oil Separation within the Compressor

Compressor Oil-Level Control

Independent Oil Return Design

High-Efficiency Cyclone Oil Separator

Oil Stabilization with Separator Leveling Plate

Multi-Stage Oil Storage

Oil-Balancing-Pipe-Free Design

Large-Capacity Gas-Liquid Separator Oil Storage

Equal-Resistance Gas-Liquid Separator Oil Return

Multi-Stage Oil Return Ports for Discharge and Leveling

Dual-Mode Precise Oil Return Control

Smart Connected Control

Centralized Management for Smarter Building Operation

The intelligent control platform connects local controllers, mobile devices, PCs and centralized management systems, supporting remote monitoring, tenant billing and third-party BAS integration through BACnet, LonWorks and Modbus. This gives building operators more flexible and efficient control across the entire HVAC system.

TIMS E+ control architecture linking local controllers, mobile devices, PCs and building management systems

Faster Start-Up with More Precise Temperature Control

TIMS E+ starts in as little as 5 seconds and reaches maximum output within 60 seconds, helping indoor spaces reach the target condition more quickly while maintaining temperature fluctuation within ±0.5°C.

TIMS E+ commercial VRF internal technology with space for quick-response performance metrics
5s Quick Start 60s Achieve Maximum Output ±0.5°C Temperature Fluctuation

Flexible System Design

Extended Piping Capability for Complex Buildings

Long piping capability and large height differences give designers greater flexibility when locating outdoor units and connecting distributed indoor zones. TIMS E+ is suitable for high-rise buildings, commercial complexes and projects with demanding installation layouts.

High-rise building diagram showing TIMS E+ piping flexibility
1100 mMaximum Total Piping Length
200 mMaximum Actual Piping Length
240 mMaximum Equivalent Piping Length
110 mMaximum Indoor/Outdoor Height Difference
30 mMaximum Height Difference Between Indoor Units
90 mMaximum Length After the First Branch

Healthy Air Technology

Four-Stage Purification for Cleaner Indoor Air

The air purification system combines fine-particle filtration, silver-ion antibacterial treatment, chemical filtration and 265 nm UVC sterilization. Each stage targets a different type of indoor contaminant to support cleaner and healthier air in commercial spaces.

95%PM2.5 Purification Efficiency
99%Allergen Purification Efficiency
99%Bacteria & Virus Purification Efficiency
85%Odor Purification Efficiency
Four-stage air purification process for the TIMS E+ indoor air treatment system
PM2.5 FilterGlobally Patented Friction-Electrostatic Technology
Efficiently Captures Particles as Small as 0.3 μm
Silver-Ion Antibacterial LayerArgenZil Silver-Ion Sterilization
Effectively Inhibits Bacterial Growth
Chemical FilterSurface Primary-Amine (RNH₂) Impregnation
Targeted Formaldehyde Decomposition
UVC Inactivation265 nm Deep-UVC Sterilization
Powerful Inactivation

Flexible System Selection

One Platform for Projects of Different Sizes

TIMS E+ covers system capacities from 8 to 102 HP and supports 18 types of indoor units. The broad product lineup allows system configurations to be matched to building scale, room function, airflow requirements and future expansion needs.

8–102 HPFlexible System Capacity
18 TypesIndoor Unit Options
TICA TIMS E+ outdoor unit lineup for system capacities from 8 to 102 HP

Compatible Indoor Unit Options

Flexible Solutions for Different Commercial Spaces

Independent product cards make the indoor unit portfolio easier to compare across cassette, ducted, wall-mounted, floor-standing, cleanroom and fresh-air applications.

Surround-airflow cassette indoor unit

Surround-Airflow Cassette Indoor Unit

DC ultra-thin quiet ducted indoor unit

DC Ultra-Thin Quiet Ducted Indoor Unit

Adjustable static pressure ducted indoor unit

Adjustable Static Pressure Ducted Indoor Unit

One-way cassette indoor unit

One-Way Cassette Indoor Unit

Cleanroom ducted indoor unit

Cleanroom Ducted Indoor Unit

HYplus cleanroom indoor unit

HYplus Cleanroom Indoor Unit

Two-way cassette indoor unit

Two-Way Cassette Indoor Unit

Wall-mounted indoor unit

Wall-Mounted Indoor Unit

Fresh air processing unit

Fresh Air Processing Unit

High static pressure large-capacity ducted indoor unit

High Static Pressure Large-Capacity Ducted Indoor Unit

Exposed ceiling indoor unit

Exposed Ceiling Indoor Unit

Industrial cabinet unit

Industrial Cabinet Unit

Purification heat recovery fresh air unit

Purification Heat Recovery Fresh Air Unit

Variable-speed jet-type indoor unit

Variable-Speed Jet-Type Indoor Unit

Industrial large-space jet-type indoor unit

Industrial Large-Space Jet-Type Indoor Unit

Technical Overview

Technical Specifications at a Glance

A concise full-series overview for preliminary project evaluation. Refer to the model-specific parameter tables and the full specification PDF for detailed selection data, combination options and final engineering confirmation.

Independent Outdoor Units8–34 HP
Modular Systems20–102 HP
Nominal Cooling Capacity25.2–285.6 kW
Nominal Heating Capacity27–318 kW
Power Supply380 V 3N~50 Hz
RefrigerantR410A
Independent-Unit APF4.50–5.20
Outdoor Airflow12,000–87,000 m³/h
Cooling Range−16°C to 56°C
Heating Range−30°C to 27°C
Outdoor Unit Noise57–66 dB(A)
Maximum Connected Indoor Units64 Units

Full Model Specifications

Review model-by-model capacities, power consumption, airflow, dimensions, weight, refrigerant charge, piping sizes and electrical requirements.

Download Full Specifications PDF

Values summarize the independent and modular TIMS E+ outdoor-unit parameter tables. For cooling operation from −16°C to 5°C, consult TICA technical support. Noise values are laboratory measurements and may differ under actual installation conditions because of ambient and reflected sound.

Project Support

Find the Right TIMS E+ Freedom Series Solution for Your Project

If you are evaluating TIMS E+ Freedom Series for a project, share your building type, required capacity, climate conditions and control requirements with our team.

To ensure your inquiry reaches us promptly, we recommend contacting us through WhatsApp using the contact panel on the right. You can also visit our official Alibaba.com store to discuss system selection and request a project quotation.

Visit Our Official Alibaba.com Store

Send Message

If you need our products please write down any questions, we will reply as soon as possible.

    Related Products

    nodata

    Home Tel Mail WhatsApp